Page 77

Energetica185_SMC

power of each of the two outlets and the total for the charging point are fully configurable by the user, amp by amp, to adapt the charging station as far as possible to the power that is actually available at each site. What’s more, real-time dynamic load balancing between sockets is supplied as standard in the Fusion range. This means that, if one of the vehicles is not consuming all the assigned power, then it is possible to share this surplus with the other socket, for more efficient charging. The DLM 2.0 system runs as standard to all the Fusion units interconnected in an installation, and even to Ingerev Rapid charging units, with no need for any special external equipment. By setting a certain power output for the units as a whole, this power can then be shared between all the vehicles being charged, and the system continuously balances the power output to each vehicle in order maximize the power handling capability. Therefore, new charging stations can be safely added to an installation, secure in the knowledge that total consumption will never exceed the contracted or allowable power level. The Fusion units are equipped with a user-friendly animated interface in the form of a 4.3” colour display which provides information of interest such as the output charging power, the power delivered and the duration of the charging operation underway. LED light systems indicate the status of each socket and a versatile RFID reader is also available with a number of identification modes, while there is also the possibility of operating without RFID in “Plug-in and Charge” mode. The Fusion range communication concessions are practically zero, given that WIFI and Ethernet are included as standard. Ethernet can operate in switch mode, seriesconnecting the units with the resulting cost savings in communication cabling. It is also possible to include 3G in each unit. However, if there are a number of interconnected units at one site, then only one 3G module is required to ensure remote communication for all units. The units are equipped with a Web server to provide access to, and the configuration and control of the units. Additionally, if no communications are available, the equipment can easily be updated and charging operations downloaded through a USB port. For the remote operation of the units by charging operators, the OCPP protocol is the de facto standard in the European e-mobility sector. The Fusion range is fully compatible with OCPP 1.5 and 1.6, as part of the standard equipment. What’s more, given that Ingeteam is totally committed to the development of this protocol, the Ingeteam equipment can be perfectly updated to OCPP 2.0 and any other future versions that may appear �� las dos salidas como la total del punto de recarga son totalmente configurables por el usuario amperio a amperio, para adaptar el punto de recarga al máximo a la potencia realmente disponible en cada emplazamiento. La gama Fusion, además, incorpora de serie el balanceo de potencia entre sus tomas, y este balanceo es dinámico y se realiza en tiempo real. Es decir, si uno de los vehículos no aprovecha su potencia asignada, el equipo puede repartir su excedente a la otra toma para que la aproveche si es posible. Este sistema DLM 2.0, se extiende de serie y sin necesidad de equipos especiales o equipamientos externos, a los equipos Fusion interconectados en una instalación, e incluso a equipos de carga rápida Ingerev Rapid. Fijando una potencia determinada para el conjunto de los equipos, ésta se reparte entre todos los vehículos que se encuentren cargando, y el sistema equilibra continuamente la potencia de cada vehículo con el fin de exprimir el potencial de la instalación al máximo. Esto puede permitirnos añadir nuevos puntos de recarga a una instalación con la tranquilidad de que el consumo total no excederá la potencia admisible o contratada. Como interfaz de usuario los equipos Fusion van dotados de pantalla a color de 4,3”, con una agradable interfaz gráfica basada en animaciones y que proporciona información de interés como la potencia de carga, energía acumulada y duración de la sesión en curso. Sistemas de iluminación LED señalizan el estado de cada toma, y también disponen de un versátil lector RFID con varios modos de identificación, o la posibilidad de trabajar sin RFID, en modo ‘Conectar y Cargar’. Las concesiones de la gama Fusion en comunicaciones son prácticamente nulas al incorporar capacidades Wifi y Ethernet de serie, y pudiendo funcionar el Ethernet en modo switch, encadenando equipos en serie con el consiguiente ahorro en coste de cableado de comunicaciones. Además es posible incorporar 3G en cada equipo, aunque si tenemos varios equipos interconectados en una localización, bastará un módulo 3G para que todos ellos tengan comunicación remota. Un servidor web integrado en los equipos permite el acceso, configuración y control de los equipos. Adicionalmente, en ausencia de comunicaciones, un puerto USB permite la actualización del equipo y la descarga de sesiones de carga de forma sencilla. Para operación remota de los equipos por parte de operadores de carga, el protocolo OCPP es el estándar de facto en la industria de la movilidad eléctrica europea. La gama Fusion es totalmente compatible de serie con OCPP 1.5 y 1.6, y al estar Ingeteam totalmente comprometida con el desarrollo del protocolo, los equipos Ingeteam son perfectamente actualizables a OCPP 2.0 y otras futuras versiones que pudieran aparecer �� energética XXI · 185 · ABR/APR19 77


Energetica185_SMC
To see the actual publication please follow the link above